Peel & Stick installation guide
SELF ADHESIVE PEEL & STICK
INSTALLATION GUIDE
General
Our Peel & Stick wallpapers are made of non-woven material with a peel-and-stick backing. This means the wallpaper will look exactly the same as the design with a standard backing.
Our self-adhesive products allow for effortless, no mess installations.
With a strong, long lasting, bond to the wall, that can be removed.
Please follow the below installation guidelines to achieve the best
results with your self-adhesive wallpaper.
Please note: Product not suitable for heavily textured paints
Advisory
• Freshly painted walls should be left for 4 weeks before application, please refer to
the paint manufacturer's instructions for guidance.
• Ensure the wall is at, clean, uniform light color and dry before application.
• Allow the wallpaper to acclimatize in the room it will be applied in for a minimum
of 24 hours before application.
• Always test compatibility prior to us e.
• For damaged walls: Use a water-based primer/sealant prior to installation.
• Repeat Step 4 after one week for longer lasting results.
Application Tools
• Plastic Smoother/Squeegee
• Razor knife/Sharp Utility Knife
• Spirit Level/Plumb Line
• Straight Edge/Ruler
• Pencil/Pen (to mark hang line)
Surface Preparation
• Ensure wall is clean, free from dust, or grease.
• If wiping with wet cloth, allow walls to dry before application.
Installation
1 Using a spirit level and pencil, mark a vertical line equal to a panel's width
on the wall, use this as a guide to hang the first panel as straight as possible.
2 Remove approx. 10 Inches of backing paper and move the panel into the
correct position.
3 Applying the adhesive to the wall (With plenty of pressure).
4 Remove trapped pockets of air from behind with squeegee.
5 Ensure the edges are firmly sealed flat to the wall.
6 Remove a further 10 Inches of backing paper and apply to the wall.
7 Repeat step 6 with each panel
How removable is Peel & Stick wallpaper?
Peel & Stick wallpaper is easy to install and remove as long as you have followed the application guidelines and pasted it onto recommended surfaces.
Generally, no damage occurs if applied properly and removed with care. However, we cannot guarantee that no damage will occur when removing the peel & stick.
To keep in mind:
Smooth, painted walls (especially semi-gloss or satin finishes) make removal easier.
A previous wallpaper, matte or flat paint may absorb adhesive, making removal trickier.
Textured walls can prevent full adhesion making the wallpaper easy to remove. We do not guarantee that there will be no damage to the surface underneath the peel & stick wallpaper after removal.
The Peel & Stick wallpaper has a fair estimate for longevity of one to two years.